Rawan Inspection LTD

Rawan Inspection Ltd

WTS is a comprehensive software program for managing welding and non-destructive examination
(NDE) data generated during fabrication and Erection of piping systems>
More About Welds Tracking System , WTS Software
Rawan Inspection Ltd

It is a project oriented program designed to provide assurances that all welding and
NDE performed on piping lines conform to project specifications
More About Welds Tracking System , WTS Software
Rawan Inspection Ltd

WTS is pre-loaded with Welder and Inspector qualifications, Drawing Lists,
Project Specifications,
More About Welds Tracking System , WTS Software

About Us

Learn more about us

Rawan Inspection ltd

Provides QA/QC and Inspection Services to oil sand , petrochemical and gas plant construction and in service inspection

Quality Assurance

Our involvement in QA/QC Services, Inspection Surveillance, NDE Supports, Auditing, Vendor Inspection and expediting services to various industries in Canada

Experiences

Field of Manufacturing , fabrication industries for Modules , boilers, pressure vessels, spool fabrication, pressure piping and structural steels.

our team

We have experienced QA/QC inspectors with certificates, API, ASNT, CWB , NB , CGSB and NACE

About WTS

See more information

more info

NDT and PWHT Requirement

NDT and PWHT

more info

Welders qualification and Performance

Repair Rate

more info

Welding Inches and Joints

Project progress

more info

Material Traceability

Fitting, Pipe and Electrode

more info

Test Package Clearance

Test packages status , Release and Hydro test

more info

Chart and Graph

Progress, NDT %

more info

E-Methanwx Project , Egypt

Petrochemical Plant

more info

Alexandria National Refining and Petrochemicals Company, Egypt

Petrochemical Plant

more info

New 750 MW Power Plant , Egypt

Electrical Power Plant

more info

DRU, VDU & HSU Project , Alberta Canada

Oil Sand

more info

Pipe Spools Fabrication

Project progress

more info

Module Piping Fabrication

Project progress

more info

Project Progress

Welding , NDT , Progress %

LOAD MORE LOADING... NO MORE WORKS

Our Services

we can serve you

Quality Assurance

We Provide comprehensive software program for managing welding and non-destructive examination (NDE) data generated during fabrication of engineered piping systems WTS software.

Inspection

Welding Inspection
, NDT ( RT , UT , MT , PT )
Civil inspections
E &I inspections

Consultations

Provide consultation services for welding inspection , welding procedure , Non destructive test interpretation , Painting and technical problems

It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout

Quality

Project Progress

Planning

Survay

From Blog

Program Features

Automatic control of the amount of NDE performed; discrepancy alerts to show when non-conforming data is entered; clearance of ISO’s and piping lines when requirements have been satisfied; and, real-time reporting WTS contains a Master Library where technical specifications, welding procedures and company

Program Concept

When Should WTS be Used

WTS processes welding and NDE information submitted by contractors to document work performed. The Program is pre-loaded with project design data – ISO drawings, material lists, piping line specifications (including NDE requirements), weld numbers and welder qualification records

WTS is designed with a multitude of unique features; including, automatic creation of welder lots during fabrication and their closing when NDE requirements have been satisfied; verification of welder qualifications for each weld; automatic control of the amount of NDE performed; discrepancy alerts to show when non-conforming data is entered; clearance of ISO’s and piping lines when requirements have been satisfied; and, real-time reporting WTS contains a Master Library where technical specifications, welding procedures and company practices are stored for use by

Program Concept

Welding procedures and company practices are stored for useby the Program on individual projects. For example, the Piping Line Classification tables are used for calculations within the Program. The library of welding procedures can be referenced when setting up a project and selecting those applicable to the project. Preferred terminology used by a company can be stated in the library and will be used in drop-down box selections within the Program. The Master Library provides a company with the means to ‘customize’ the Program for their use

Program Features

Piping Line Classifications are identified for each ISO drawing when data is uploaded or entered. Specifications for each line classification must be entered into WTS. Each line classification is applicable for certain design conditions (temperature and pressure) and specific fluid codes. Some piping line classifications for the project may require material traceability and this can be specified. Each piping line classification is applicable to a set of weld joints. NDE requirements to be used for each of type weld joint are defined along with the percentage of welds in the piping lineto be examined. NDE Requirements will vary with pipe size (both diameter and wall thickness). The specifications define P-numbers for piping material and the fill processes to be employed. The Program recognizes welding processes and NDE to be employed.

Master Library

Program recognizes welding processes and NDE to be employed are dependent upon pipe size (diameter and wall thickness). When welding and NDE data is entered in Pipe Welding form, the Program performs automatic verification that all defined elements of the piping specification are adhered to. In addition,N DE tables are created where the percentage of welds that have been examined and accepted are automatically accepted. This provides assurance that piping line requirements have been satisfied. Detailed welder qualification records are stored in WTS. The Program references these records as fabrication data provided by contractors is entered in the Program. The Program verifies, at the Users option, numerous variables to verify qualification, e.g. is a qualification record current, is the welder qualified for the P-number or process? When discrepancies occur, the Program provides an immediate alert.WTS, can automatically create welder lots and line class lots. Appropriately selecting the Production RT welds when required. .

Piping Line Specifications

Appropriately selecting the Production RT welds when required. The Program maintains careful monitoring of the lots, to inform the User when they are closed (specified size has been reached)and when they are cleared. Lots may also be manually closedor cleared at any time. So long as they meet the pipingline class requirements. By maintaining close control of NDE. The Program knows the piping line classification for each weld and specified NDE requirements. It is very sensitive to the cost of performing excessive NDE; therefore, a detailed system of alerts is utilized throughout the Program to be assured that the proper amount of NDE is performed. Lots / NDE Requirements .

Welder Qualification Records

Get In Touch

Other Information Contact

Adress: 336, 350 Parsons Creek Dr , Fort Mcmurray ,T9K0M1 Alberta Canada
Email: mohammad@rawan-ltd.ca
Phone: +1 (780) 838 0673

Rawan Inspection Ltd

Rawan Inspection Ltd

Rawan Inspection Ltd

About Us

Rawan Inspection ltd

Quality Assurance

Experiences

our team

About WTS

Our Services

Quality Assurance

Inspection

Consultations

Quality

Project Progress

Planning

Survay

From Blog

Program Concept

Program Features

Master Library

Piping Line Specifications

Welder Qualification Records

Get In Touch

Other Information Contact